If you would like more info, please check out the event page on Eventbrite.
2016-04-13
Modular Demo - Noise Engineering @ Perfect Circuit Audio
This Saturday, April 16th from 3PM to 5PM, Noise Engineering will be doing a Q&A as well as product demo at Perfect Circuit in Burbank, CA. Like previous events, it should be a fun and information packed session so come out to see what's going on.
If you would like more info, please check out the event page on Eventbrite.
If you would like more info, please check out the event page on Eventbrite.
2016-04-11
Modular Manufacturing - Mutable Instruments
Watch as modules come to life in this Mutable Instruments "A Day at the Factory" video.
2016-03-31
Modular Patch - Random Addressed Fixed Voltage Sequencer
With this patch, I intend to demonstrate how to setup a randomly addressed sequencer that references fixed voltages. This method allows for specific note selection so it is easy to tune in desired values while retaining a random progression in the sequence.
Set the A-129-3 Vocoder Slew-Limiter channel 1 offset control to 5 and then
patch CV out 1 into the A-152 Addressed T&H/Switch SW I/O channel 1 input. Set the Man N control on the A-149-1 Quantized Random Voltages to 5 and then patch the A-149-1 Quantized Random Voltages n+1 output to the CV In on the A-152. Set the A-152's CV control to 10 and patch a clock signal into the Clk In of the A-149-1.
Set the A-129-3 Vocoder Slew-Limiter channel 1 offset control to 5 and then
patch CV out 1 into the A-152 Addressed T&H/Switch SW I/O channel 1 input. Set the Man N control on the A-149-1 Quantized Random Voltages to 5 and then patch the A-149-1 Quantized Random Voltages n+1 output to the CV In on the A-152. Set the A-152's CV control to 10 and patch a clock signal into the Clk In of the A-149-1.
2016-03-02
Modular Music - A-152 Quantized Randub Voltages
An exploration into randomly addressed switching and wavetables.
2016-03-01
2016-02-23
2016-02-22
Modular Patch - Four Stage Sequential Switch Sequencer
Set the A-129-3 Vocoder Slew-Limiter channel 1 offset control to 10 and then patch CV out 1 into
input 1 on the Seq Switch. Patch a clock signal into the Seq Switch clock input and set the number of steps to 4.
input 1 on the Seq Switch. Patch a clock signal into the Seq Switch clock input and set the number of steps to 4.
2016-02-21
Modular Patch - Mixed Clock Divider Sequencer
Patch a clock source into the A-160 Clock Divider. Take the /2 output from the A-160 and patch this
into input 2 of the A-138c Polarizing Mixer. Adjust the level of input 2 to +1.
into input 2 of the A-138c Polarizing Mixer. Adjust the level of input 2 to +1.
2016-01-28
Subscribe to:
Posts (Atom)