Thonk: Toppobrillo
2014-03-12
Thonk + Toppobrillo = Thonkobrillo?
Thonk will be stocking DIY PCBs for both the Triple Wave Folder and the Buchla 281 (clone) Function Generator projects. The following link will take you to their site for ordering as well as more information.
Thonk: Toppobrillo
Thonk: Toppobrillo
2014-03-07
Toppobrillo Quantimator Firmware Upgrade
Toppobrillo has programmed a few new features into the Quantimator. Those features are:
- Faster Quantize Response - The note acquisition to output latency has been reduced to around 1.5 milliseconds.
- Selectable Trigger-On-Quantize Mode - When in SCALE mode (without external triggering), OUTPUT 3 now outputs a ~1.5 millisecond 5V pulse each time a new value is quantized. The Quantimator still operates as an ASR when using the trigger input. This functionality is user-selectable on power-up (new units will ship without this enabled to avoid confusion)
If you would like to have your Quantimator updated to the new firmware, please contact info AT toppobrillo DOT com and Josh will get you sorted. If you happen to live in the Los Angeles area and would like to have your Quantimator updated, I will be available to update your module for you after March 21st. Just send an email to address listed above and mention "George, update my module!" somewhere in the body of the email.
For more information, please refer to this Muff Wiggler Post.
- Faster Quantize Response - The note acquisition to output latency has been reduced to around 1.5 milliseconds.
- Selectable Trigger-On-Quantize Mode - When in SCALE mode (without external triggering), OUTPUT 3 now outputs a ~1.5 millisecond 5V pulse each time a new value is quantized. The Quantimator still operates as an ASR when using the trigger input. This functionality is user-selectable on power-up (new units will ship without this enabled to avoid confusion)
If you would like to have your Quantimator updated to the new firmware, please contact info AT toppobrillo DOT com and Josh will get you sorted. If you happen to live in the Los Angeles area and would like to have your Quantimator updated, I will be available to update your module for you after March 21st. Just send an email to address listed above and mention "George, update my module!" somewhere in the body of the email.
For more information, please refer to this Muff Wiggler Post.
2014-03-04
Modular Tutorials - Modular Synth Basics
Are you new to modular synthesizers? Would you like an introductory into the never ending world of modulating modulators with modulators? If so, check out this new series by The Tuesday Night Machines on YouTube. You can MIDI aside for now while you get down and dirty with the basics of voltage controlled music. Don't worry, MIDI will always be your friend and will still be there when you need it.
2014-03-03
EquaComp 10
A continuation of the last post containing some more audio from the Microbe Equation Composer being passed through the Tiptop Audio MIXZ.
EquaComp 03
Nothing too special. A fellow Muff Wiggler asked to hear some audio recorded through the Tiptop Audio MIXZ. I just happened to have recorded this a day ago for another reason. So here it is in the raw.
Subscribe to:
Posts (Atom)